英语翻译钢结构尺寸检查及焊接外观检查焊接检验 :1.学习:技术规范与图纸,熟悉WPS/WPQR2.焊前检查:检查焊接表面
来源:学生作业帮 编辑:百度作业网作业帮 分类:综合作业 时间:2024/07/31 22:55:37
英语翻译
钢结构尺寸检查及焊接外观检查
焊接检验 :
1.学习:技术规范与图纸,熟悉WPS/WPQR
2.焊前检查:检查焊接表面状况(有无生锈、油污、氧化皮),坡口形式与图纸相符与否,焊接余量是否合理.
3.焊接参数是否符合WPS要求(电流、电压、送丝速度、焊工资质、焊机合格证、焊条焊剂是否烤过、焊丝表面是否清洁),焊接过程是否清根,有无预热要求,预热温度是否合适、严格控制层间温度、焊后热处理是否的得当
4.焊后检验:焊缝外观及表面缺陷检查(焊缝太宽,焊瘤,飞溅,表面气孔,咬边,未焊满,未熔合等等);进行必要的UT无损检验,监督PT,MT,RT是否正确按时进行.包括NDT抽查比例是否正确,检查位置是否正确.
5.防腐检验:学习油漆工艺,检验打砂处理后表面清洁度、粗糙度检验,焊接缺陷2次检验,油漆厚度检验.
6.检查记录:整理检验数据,做尺寸报告
钢结构尺寸检查及焊接外观检查
焊接检验 :
1.学习:技术规范与图纸,熟悉WPS/WPQR
2.焊前检查:检查焊接表面状况(有无生锈、油污、氧化皮),坡口形式与图纸相符与否,焊接余量是否合理.
3.焊接参数是否符合WPS要求(电流、电压、送丝速度、焊工资质、焊机合格证、焊条焊剂是否烤过、焊丝表面是否清洁),焊接过程是否清根,有无预热要求,预热温度是否合适、严格控制层间温度、焊后热处理是否的得当
4.焊后检验:焊缝外观及表面缺陷检查(焊缝太宽,焊瘤,飞溅,表面气孔,咬边,未焊满,未熔合等等);进行必要的UT无损检验,监督PT,MT,RT是否正确按时进行.包括NDT抽查比例是否正确,检查位置是否正确.
5.防腐检验:学习油漆工艺,检验打砂处理后表面清洁度、粗糙度检验,焊接缺陷2次检验,油漆厚度检验.
6.检查记录:整理检验数据,做尺寸报告
![英语翻译钢结构尺寸检查及焊接外观检查焊接检验 :1.学习:技术规范与图纸,熟悉WPS/WPQR2.焊前检查:检查焊接表面](/uploads/image/z/17029955-11-5.jpg?t=%E8%8B%B1%E8%AF%AD%E7%BF%BB%E8%AF%91%E9%92%A2%E7%BB%93%E6%9E%84%E5%B0%BA%E5%AF%B8%E6%A3%80%E6%9F%A5%E5%8F%8A%E7%84%8A%E6%8E%A5%E5%A4%96%E8%A7%82%E6%A3%80%E6%9F%A5%E7%84%8A%E6%8E%A5%E6%A3%80%E9%AA%8C+%EF%BC%9A1.%E5%AD%A6%E4%B9%A0%EF%BC%9A%E6%8A%80%E6%9C%AF%E8%A7%84%E8%8C%83%E4%B8%8E%E5%9B%BE%E7%BA%B8%2C%E7%86%9F%E6%82%89WPS%2FWPQR2.%E7%84%8A%E5%89%8D%E6%A3%80%E6%9F%A5%EF%BC%9A%E6%A3%80%E6%9F%A5%E7%84%8A%E6%8E%A5%E8%A1%A8%E9%9D%A2)
这个操作说明书不难,以下为手工翻译,仅供参考.
Steelwork dimension inspection and welding apperance check
Welding verification:
1. Study: Technical Specification and Drawings, be familar with WPS/SPQR;
2. Checking before welding: inspect welding surface conditions (for stain, oil, or scales), groove form must comply with drawing, and welding margin is rational;
3. Process verification: check whether welding parameters comply with WPS requirements (current, voltage, wire feeding speed, welder qualification, welding machine certification, whether welding bar is roasted, and whether welding wire surface is clean);
Whether back chipping is required for welding process;
Whether preheating is necessary;
Whether preheating temperature is suitable, whether temperatures between layers and whether thermal treatment after welding is propoer;
4. After weld verification: Welding joint and apperance defects inspection (oversized welding joint, weld beading, spoil, surface bubble, undercut, insufficient weld, or unfused etc.); make necessary UT undamage inspection, monitor PT, MT, and RT are correct and ont time. Check whether NDT sampling ratio and inspection postiion is correct;
5. Anti-corrosion inspection: learn paiting process, check surface cleaness, roughness after sand blasting, check twice for welding deftects, and check for paiting depth;
6. Inspection record: collect inspection data, and make dimension report.
Steelwork dimension inspection and welding apperance check
Welding verification:
1. Study: Technical Specification and Drawings, be familar with WPS/SPQR;
2. Checking before welding: inspect welding surface conditions (for stain, oil, or scales), groove form must comply with drawing, and welding margin is rational;
3. Process verification: check whether welding parameters comply with WPS requirements (current, voltage, wire feeding speed, welder qualification, welding machine certification, whether welding bar is roasted, and whether welding wire surface is clean);
Whether back chipping is required for welding process;
Whether preheating is necessary;
Whether preheating temperature is suitable, whether temperatures between layers and whether thermal treatment after welding is propoer;
4. After weld verification: Welding joint and apperance defects inspection (oversized welding joint, weld beading, spoil, surface bubble, undercut, insufficient weld, or unfused etc.); make necessary UT undamage inspection, monitor PT, MT, and RT are correct and ont time. Check whether NDT sampling ratio and inspection postiion is correct;
5. Anti-corrosion inspection: learn paiting process, check surface cleaness, roughness after sand blasting, check twice for welding deftects, and check for paiting depth;
6. Inspection record: collect inspection data, and make dimension report.
英语翻译机械检查:检查外观质量符合其图纸工艺要求 检查外形尺寸及安装尺寸符合图纸要求 装配质量符合图纸要求本产品按.技术
如何检查超声波焊接机功率板
焊接质量检查的目的是什么
钢管焊接的焊缝检查标准?
1.焊接的质量检查主要有哪三种方式?
检查
焊接管道注满水后还可以对焊口射线检查吗?
焊接金相检验问题两块板点焊,金相检验要检查熔核直径还有熔渗深度.其中熔渗深度怎么测量?
()是焊条电弧焊施焊前必须对焊接电源进行检查的?
不锈钢、锌合金外观检验标准、QC检查标准 急
英语翻译测量变压器绕组直流电阻的目的是:检查绕组接头的焊接质量和绕组有无匝间短路;电压分接开关的各个位置接触是否良好及分
检查检查cpk是什么意思