英语翻译工作经历\x05展茂汽车零部件公司\x052008.1-2010.8 产品机构设计工程师职责● 负责按客户要求和

英语翻译
工作经历\x05展茂汽车零部件公司\x052008.1-2010.8 产品机构设计工程师职责● 负责按客户要求和日程设计承接的新产品的3D机构,确保3D品质●在厂内召开FMEA会议,就新产品的开模性,生产的组立,OTS实验认可等项目,进行设计初期规划●和客户针对新产品进行设计检讨并修改3D,并建立完整的3D档案\x05●跟踪RP制作并合车,并针对合车问题点进行3D数模的修改,以配合钣金的变异性●针对DVP问题进行数模的修正,满足主机厂试验标准.罗比汽车照明有限公司2010.9- 产品设计工程师:职责●产品2D图绘制●负责奇瑞Q22头灯、尾灯设计修正,配合主机厂设变做产品设计变更,修正CAD确保下工程实施,已达到产品良率.●负责B23前大灯增加日间行车灯的数据更改●完成PPAP设计输出资料.主要业绩1.担当YAMAHA.1S8方向灯项目主设计工作,并与YAMAHA 搭配做设计改善及试验2.独立完成别克君威、RAV4改装灯的设计确认,跟踪模具问题点,并就模具问题点提出修改对策3.参与研发部标准件库建立.4.参与产品设计基准建立.职业技能熟悉各种灯具类型,机构,模具作动方式,结合方式与光学机能等.精通车灯各个部品评价基准,并就试验结果提出改善建议.熟悉TS1694下新产品设计开发流程,并能准确的把握时间节点.精通CATIA曲面、零件、逆向等模组.熟悉车灯各部件的评价基准.培训经历2008.3-2008.6 台湾伊卡公司CATIA培训,2009.4-2009.6 TS16949体系内审员资质培训,厂内技术培训（车灯设计培训,二次加工说明,模具概念……）2010年中央广播电视大学本科在读工作经历展茂汽车零部件公司2008.1-2010.8 产品机构设计工程师职责● 负责按客户要求和日程设计承接的新产品的3D机构,确保3D品质\x05●在厂内召开FMEA会议,就新产品的开模性,生产的组立,OTS实验认可等项目,进行设计初期规划●和客户针对新产品进行设计检讨并修改3D,并建立完整的3D档案●跟踪RP制作并合车,并针对合车问题点进行3D数模的修改,以配合钣金的变异性●针对DVP问题进行数模的修正,满足主机厂试验标准.

工作经历(履历)\x09: 1. 展茂汽车零部件公司 (2008.1-2010.8) 产品机构设计工程师
职责 : ● 负责按客户要求和日程设计承接的新产品的3D机构,确保3D品质
●在厂内召开FMEA会议,就新产品的开模性,生产的组立, OTS实验认可等项目,进行设计初期规划
●和客户针对新产品进行设计检讨并修改3D,并建立完整的3D档案\x09
●跟踪RP制作并合车,并针对合车问题点进行3D数模的修改,以配合钣金的变异性
●针对DVP问题进行数模的修正,满足主机厂试验标准.
2. 罗比汽车照明有限公司(2010.9- now) 产品设计工程师
职责 : ●产品2D图绘制
●负责奇瑞Q22头灯、尾灯设计修正,配合主机厂设变做产品设计变更,修正CAD确保下工程实施,已达到产品良率.
●负责B23前大灯增加日间行车灯的数据更改
●完成PPAP设计输出资料.
主要业绩: 1.担当YAMAHA.1S8方向灯项目主设计工作,并与YAMAHA 搭配做设计改善及试验
2.独立完成别克君威、RAV4改装灯的设计确认,跟踪模具问题点,并就模具问题点提出修改对策
3.参与研发部标准件库建立.
4.参与产品设计基准建立.
职业技能 :
熟悉各种灯具类型,机构,模具作动方式,结合方式与光学机能等.精通车灯各个部品评价基准,并就试验结果提出改善建议.
熟悉TS1694下新产品设计开发流程,并能准确的把握时间节点.精通CATIA曲面、零件、逆向等模组.
熟悉车灯各部件的评价基准.
培训经历 : 2008.3-2008.6 台湾伊卡公司CATIA培训,
2009.4-2009.6 TS16949体系内审员资质培训,厂内技术培训（车灯设计培训,二次加工说明,模具概念……）
2010年中央广播电视大学本科在读
Resume / Work experience:
1. (Allied Materials?) Auto Parts, Inc. (2008.1-2010.8) as Product Mechanical Design Engineer
Duties: ● responsible for the 3D design structure of new products according to customer requirements and schedule, to ensure the quality of 3D
● to hold FMEA meeting inside the factory, to carry out initial planning on the feasibility of molding on new products, set up of production group, and the OTS recognized experimental projects
● to discuss and review with customers for new product design , modify 3D, and build a complete 3D file
● Tracking RP production and combined-car test , and perform 3D digital-to-analog changes focusing on problem areas of the combined-car tests, in order to match the variability of sheet metal
● carry out digital-to-analog amendments of the DVP issues to meet the OEM factory test standards.
2. Robbie Automotive Lighting Co., Ltd. (2010.9-now) as Product Design Engineer
Duties: ● produce 2D product drawing
● responsible for Chery Q22 headlight and rear-light design modifications, to make product design changes to match with the OEM product changes, revise CAD to ensure the correct implementation and product yield has been met.
● responsible for the B23 headlights increased daytime running lights data changes
● Complete PPAP design output data.
Main contributions:
1.\x09responsible for the YAMAHA.1S8 direction-light main project design, and perform design improvements and tests with YAMAHA
2.\x09 independently modified and validated the Buick Regal and RAV4 lights, tracked the mold problems and to design measures to correct the problems
3.\x09participated in the establishment of R & D standard parts library.
4.\x09participated in product design base establishment.
Professional Skills :
Familiar with a variety of lighting types and their structures, mold actuation mode, binding mode and theie optical functions, etc. . Proficient in all vehicle-lights evaluation benchmarks, and able to make recommendations for improvement on test results.
Familiar with the TS1694 series product design and development under the new process, and can accurately manage the deadlines. Proficient in CATIA surfaces, parts, reverse and other modules.
Familiar with the various vehicle-lights and their components evaluation benchmark standards.
Training experience:
March-June 2008 CATIA training in Taiwan ICA Company,
April-June 2009 TS16949 standard internal auditor qualification training system , in-factory technical training (lightings design training, secondary processing instructions, tooling concept ...)
2010 – now study in the Central Radio and Television University .